Connect devices

Overview of connectable devices
Table of contents

    		Full compatibility

    		With restrictions

    		No compatibility

    Inverter

    Fronius

     EnergyManager proManager flex
    Primo (3.0 - 8.2)

     

     

    Symo (3.0 - 20.0)

     

     

    Symo Advanced

     

     

    ECO

     

     

    Primo / Symo GEN 24

     

     

    Primo / Symo GEN 24 plus
    [hybrid system]

     

     

       

    Restrictions

    Primo / Symo GEN 24 plus
    [hybrid system]    		No display of the state of charge 
    of the battery (SoC)

    SMA

     EnergyManager proManager flex
    Sunny Boy (1.5 -6.0)

     

     

    Sunny Tripower (3.0 - 10.0)

     

     

    Sunny Tripower (15000 - 25000) TL

     

     

    Sunny Tripower (5.0-10.0) -3SE-40
    [Hybrid system]

     

     

    SMA STP X 
    (12 - 25)

     

     

    KACO

     energyManager proManager flex
    blueplanet NX3 M2 (3.0 - 20.0)

     

     

    blueplanet NX3 M3 (25.0 - 33.0)

     

     

    Kostal

     EnergyManager pro Manager flex
    PLENTICORE plus (3.0 - 10)

     

     

    PIKO IQ (3.0 - 10)

     

     

    PIKO MP plus

     

     

    PIKO CI

     

     

    PIKO (12 - 20)

     

     

       

    Steca

     EnergyManager pro Manager flex
    StecaGrid coolcept fleX XL (4213 - 10013)

     

     

    StecaGrid coolcept fleX (1511 - 3611)

     

     

    StecaGrid coolcept3 fleX (3213 - 6013)

     

     

    StecaGrid coolcept fleX (3011 - 5011)_2

     

     

    Huawei

     EnergyManager pro Manager flex
    SUN2000
    -2/3/3.68/4/4.6/5/6KTL-L1*

     

     

    SUN2000
    -3/4/5/6/8/10KTL-M1
    (high-current version)*

     

     

    *) Hybrid system with LUNA2000-5/10/15-S0 battery system possible. Additional component required for integration into the energy management system: Smart Dongle-WLAN-FE

    SolarEdge

     EnergyManager pro Manager flex
    SolarEdge

     

     

    Restrictions

    SolarEdgePermanent error message in the Installer Center "NoPowerACOutMax" (cannot be acknowledged)
      

    Non-compatible inverters

    The power is recorded via separate power meters or energy meters.

    Electricity storage

    SOLARWATT

     EnergyManager proManager flex
    Battery flex AC-1

     

     

    MyReserve Command 25

     

     

    MyReserve Command 20.2

     

     

    MyReserve 500/800

     

     

       

    VARTA

     energyManager proManager flex
    element backup S5 *

     

     

    pulse neo 6 *

     

     

    *) Additional main meter (AC sensor, 2-direction S0 meter, Shelly Pro 3EM) required

    Hybrid systems

    The supported hybrid systems are listed under Inverters.

    Wallboxes

    Keba

    EnergyManager proManager flex
    KeContact
    P30
    c-series

    KeContact
    P30
    x-series

    KeContact
    P30
    Company car wallbox

    KeContact
    P30
    PV Edition

    KeContact
    P30
    a-Series

    KeContact
    P30
    Germany edition

    Webasto

    EnergyManager proManager flex
    liveLAN
    (number of devices*: 1)    		LAN
    (Number of devices*: 1)
    next--LAN, WLAN (via router)
    (number of devices*: 1)

    Alfen

    EnergyManager proManager flex
    Eve Single
    (S-line / Pro Line)

    Restrictions

    Automatic phase switching function not available when installed on EnergyManager pro.

    Possible number of actively controlled wallboxes in the energy management system

    EnergyManager proManager flex
    Keba13
    Webasto
    (Live/Next)    		11
    Alfen13

    Shelly devices

    Possible applications

    The various Shelly device types can perform a wide range of tasks in the SOLARWATT energy management system:

     NetworkPossible applications
      EnergyManager proManager flex
    3EMWLAN

     

    • Measuring/switching SG-Ready heat pump
       

     

    • Main meter
    • Measuring/switching SG Ready heat pump
    Pro 3EMWLAN
    LAN
    • Main meter
    • Sub-meter
    • Generation meter
      (inverter replacement)
    • Main meter
    • Sub-meter
    Per 1PM
    Per 2PM
    Pro 4PM    		WLAN
    LAN
    • Sub-meter
    • Measuring/switching consumers
    • Sub-meter
    • Measuring/switching consumer
    Plus1PM
    Plus2PM    		WLAN
    • Submeter
    • Measuring/switching consumer
    • Submeter
    • Measuring/switching consumers
    Plus Plug S
    Plug S    		WLAN
    • Measuring/switching consumer
    • Measuring/switching consumer
    Shelly 2.5WLANNot compatible
    • Sub-meter
    • Measuring/switching consumer

    Main meter: Use as a 2-direction meter
    Sub-meter: Use as a 1-direction meter

    Network interface and installation location

    Shelly deviceNetwork interfaceInstallation location
    3EMWLANSwitch cabinet
    Pro 3EMWLAN
    LAN    		Switch cabinet
    Pro 1PM
    Pro 2PM
    Pro 4PM    		WLAN
    LAN    		Switch cabinet
    Plus 1PM
    Plus 2PM    		WLANFlush-mounted box
    Plus Plug S
    Plug S    		WLANsocket
    Shelly 2.5WLANFlush-mounted box

     

    Heating solutions

    EnergyManager proManager flex
    Heat pump via
    SG Ready interface

    *

    *

    Stiebel Eltron heat pump
    (thermal energy management)

    Supported types:

    • WPL-A 07 HK 230 Premium
    • WPL 20 A
    • WPL 25 A
    • WPL-A 10 HK 400 Premium
    • WPL-A 13 HK 400 Premium
    • LWZ 304 SOL
    • LWZ 404 SOL
    • LWZ 504
    • LWZ 5 CS Premium
    • LWZ 8 CS Premium

    EGO Smart Heater

    my-PV AC ELWA 2

    my-PV AC THOR 9s

    *) Connection via Shelly 3EM.

    Energy meter / main meter

    Manager flex

    Meter types that can be used with the SOLARWATT Manager flex:

    InterfacePossible applications
    S0 meter*S0
    • 1 x main counter
    • 2 x sub-meter
    • 1 x generation meter
    SOLARWATT
    AC sensor

    Ethernet via
    Battery flex /
    MyReserve

    • Main meter
    Shelly devices**Ethernet /
    WLAN
    • Miscellaneous

    *) A total of up to 2 S0 meters can be connected. For more information, see the S0 counter section at the bottom of this page.

    **) See section Shelly devices.

    EnergyManager pro

    Meter types that can be used with the SOLARWATT EnergyManager pro:

    InterfacePossible applications
    S0 meter*S0
    • 1 x main counter
    • 2 x sub-meter
    • 2 x generation meter
    SOLARWATT
    AC sensor

    • Ethernet via
      Battery flex /
      MyReserve
    • CAN
    • Main meter
    • Sub-meter
    • Generation meter
    Shelly devices**Ethernet /
    WLAN
    • Miscellaneous
    Janitza
    UMG 103-CBM    		RS485
    • Sub-meter
    • Generation meter
    ABB B23RS485
    • Sub-meter
    • Generation meter

    *) A total of up to 2 S0 meters can be connected (without digital extension). For more information, see section S0 meters at the bottom of this page.

    ***) See section Shelly devices.

    S0 meters

    S0 meters are electrical energy meters that transmit their meter readings via electrical pulses.

    Meters that supply pulses in accordance with EN62053-31 can be connected to the SOLARWATT Manager.

    The meters are connected directly, i.e. to the S0 inputs of the SOLARWATT Manager.

    Possible applications

    Possible applications
    EnergyManager proManager flex
    1-direction S0 meter
    • Main meter
      (setup type: grid-side PV system)
    • Sub-meter
    • Generation meter
    • Meter for Combined Smart Plug*
    • Main meter
      (setup type: grid-side PV system)
    • Sub-meter
    • Generation meter
    2-direction S0 meter
    • Main meter
      (Setup type: House-side PV system)
    • Main meter
      (Setup type: House-side PV system)

    *) Can only be used in conjunction with a Digital Extension.

    Number of connectable meters

    Quantity
    EnergyManager pro
    without Digital Extension    		EnergyManager pro
    with Digital Extension    		Manager flex
    S0 meter as sub-meter282
    S0 meter as generation meter
    (inverter replacement)    		281

    Tested meter types

    The following meter types have been tested for faultless operation on the SOLARWATT Managers. Other makes may be usable without restriction. The list only shows the devices tested by SOLARWATT.

    • SOLARWATT EnergyMeter (3-phase)
    • SOLARWATT Manager meter 1-phase
    • B+G DRS155D (1-phase)
    • KDK PRO380-S (3-phase, 2-direction meter)
    • Eltako DSZ15D (Not compatible with Digital Extension)
    • Eltako DSZ15DE (Not compatible with Digital Extension)

    The Eastron SDM630 MCT is not compatible with the EnergyManager pro or SOLARWATT Manager flex.

    Ripple control receiver

    EnergyManager proManager flex
    Ripple control receiver

    Print