Required tools & accessories

• Communication of the Inverter vision one with the meter: shielded cable with twisted-pair wires for RS485 communication, e.g. LIYCY (TP) 2x2x0.34 mm² for indoor use, for outdoor use an equivalent UV and weather-resistant cable that complies with the required IP protection class IP65
• Communication of the Inverter vision three with the meter: Cat 5e S/FTP or Cat 6 U/FTP patch cable, shielded, stranded wire, alternatively an equivalent installation cable, UV and weather-resistant for outdoor use, which complies with the required IP protection class IP65
• LAN connection Inverter vision one and vision three to the router: Cat 5e S/FTP or Cat 6 U/FTP patch cable, shielded, stranded wire, alternatively an equivalent installation cable, UV and weather-resistant for outdoor use, which complies with the required IP protection class IP65 
  (connection via WLAN only in exceptional cases)
• DC and AC cable for the inverter
• Earthing cable for the inverter
• Suitable circuit breaker
• Cable ties
• Battery vision cable cover (optional)

ATTENTION: The cable cover is not included with Battery vision and is available for ordering separately.
Contact sales to order: sales.uk@solarwatt.com (UK & IRE customers)

When using the Inverter vision one in three-phase grids

• Three-phase electricity meter DTSU 666 duo RS485 CT
  (Solarwatt version)

ATTENTION: A three-phase meter is not included with Inverter vision one and must be ordered separately.
Contact sales to order: sales.uk@solarwatt.com (UK & IRE customers)

Wrench

Screwdriver(s)

Drill

Pliers

Crimping pliers

Wire stripper

Drill

Spirit level

Folding rule

Drill hole marker

Multimeter

Safety shoes

Safety gloves

Safety goggles