Battery vision backup booster

Observe all Safety Instructions and requirements for the installer.

Observe the Specifications for the installation location and the maximum and minimum installation distances for the inverter, meter, battery, backup booster and clusterbox.

• Attaching the wall bracket to the wall

• Attach and fix the backup booster

• Open the housing cover, loosen the cover plate screws, remove the cover plate

• Establish mains and house-side connectors (via screw terminal)

• Establish grid and backup connectors to the inverter (via spring clamp)

• Connecting the grounding (M5, 2.0 Nm)

• Check that the device is installed safely and reliably
• Check that the earthing cable is connected correctly, securely and reliably
• Check that all cables are connected correctly, securely and reliably and that the phase sequence is correct
• Close the cover plate

Further steps:

Continue with commissioning Battery vision backup booster