Inverter vision one communication cable to the 3-ph. Connect meter DTSU

• Configure the RJ45 connector for the connector to the meter and plug it into the inverter

Observe the requirements for the cable type for the communication connection under Required accessories and tools.

The connection for communication with the DTSU electricity meter is made via the direct connections 24 and 25.

To protect the connection in wet room and outdoor installations, the plug housings included in the scope of delivery of the inverter must be used on the inverter side.

Note: When using an installation cable, it may not be possible to fit self-assembled plugs through the plug housing. In this case, make sure that the plugs used are UV and weather-resistant for outdoor use and that the required IP rating IP65 is maintained.